The color of the shell may have the following color combinations:
| Body Color |
Door & Visor Color |
| fir green (RAL 6009) |
fir green (RAL 6009)* |
| signal yellow (RAL 1003) |
fir green (RAL 6009) |
| signal yellow (RAL 1003) |
signal yellow (RAL 1003) |
| signal yellow (RAL 1003) |
signal black (RAL 9004) |
| signal black (RAL 9004) |
signal black (RAL 9004) |
| agate gray (RAL 7038) |
signal black (RAL 9004) |
| agate gray (RAL 7038) |
agate gray (RAL 7038) |
| light ivory (RAL 1015) |
signal black (RAL 9017) |
|
| Color Samples: |
|
Fir Green (RAL 6009) |
|
Signal Black (RAL 9004) |
|
Signal Yellow (RAL 1003) |
|
Agate Gray (RAL 7038) |
|
Light Ivory (RAL 1015) |
The luminous field's visor is easily installed (twisted on) to the door. The 200 mm and 300 mm traffic lights are also available with a short visor for limited space situations, such as a pedestrian signal placed at an intersection.
The use of the short visor impedes the anti-phantom properties of the traffic light and is not recommended for traffic lights without a symbol diaphragm or anti-phantom mask.
The lenses are made of glass or polycarbonate plastic, according to EN, ITE, or DIN standards. They mount on the door of the traffic light with an EPDM rubber seal that withstands temperatures up to 160o C.
The color of the refraction lenses can be red, yellow, green, clear, or white, according to CIE S004/E, EN 12368, DIN 6163, or ITE standards.
The polycarbonate lenses can also be heat welded to the door. The LED optical systems are available only with their built-in polycarbonate lenses and are mounted with a rubber seal.
The optical system used by VRX allows the reflection of very little sunlight. The easy installation of a mask, in extremely demanding cases, can result in an additional 50% reduction of the reflection.
There are two types of masks:
The cell-type mask has a number of holes, hexagonal shaped, that limit the reflection
of the sunlight.
The louver-type mask has horizontal metal louvers, whose top surface is
painted flat black, while their bottom surface is highly reflective. The sunlight is absorbed by the black surface
of the louvers, while the bottom surface minimizes the light intensity loss, caused by the installation of the anti-phantom
mask.
(The LED Optical System does not
require an anti-phantom mask)
The lamps used are the following:
Incandescent Lights, vibration proof type, krypton, 230V E27 with 8.000hrs life expectancy
and rating:
|
| Power |
Traffic light type |
Luminous field diameter |
| 25W |
for vehicles |
100mm |
| 40W |
for pedestrians |
200mm |
| 75W |
for vehicles |
200mm |
| 100W |
for vehicles |
300mm |
|
|
|
|
|
Halogen Lamps, 10V, BA20s with 15.000hrs life expectancy
and rating:
|
| Power |
Traffic light type |
Luminus field diameter |
| 25W |
for vehicles or pedestrians |
200mm |
| 30W |
for vehicles |
300mm |
|
|
|
|
Light Emitting Diode (LED) Optical Systems, the latest technology development in traffic light design,
with the following advantages:
- long life expectancy with 100.000hrs of operation
- high light intensity
- luminance uniformity
- minimal degradation of luminous properties in time
- very low energy consumption
- minimum requirements for maintenance
|
|
The proper reflector is selected, according to the type of lamp used.
The following types of lamp holders are used:
E27 for incandescent lamps
BA20s for halogen lamps
The power supply of the halogen lamps satisfies the special safety requirements and has 20-22 VA rating for 20W lamps or 30-45 VA rating for 30W lamps. The power voltage determines the power supply type.
